WHAT IS SO GOOD ABOUT A ‘THERMADRY’ SYSTEM? 

Thermadry cleans as well as the traditional hot water extraction method, in many cases Thermadry will give better results. 

The Thermadry is compact, lightweight, very queit.

Carpets are left completely dry within a maximum time of 15 minutes after cleaning. 

The Thermal Rotary Machine does not incorporate vacuum motors or water pumps therefore cutting down running costs and saving downtime. 

The chemical used in the process is pH7 (neutral), is safe to use on wool carpets and does not require rinsing. 

Thermadry is quicker than hot water extraction cleaning.

 

HOW DOES THE ‘THERMADRY’ SYSTEM WORK?  

All carpet areas to be cleaned must be well vacuumed, using an upright vacuum that incorporates a roller brush (Sebo BS36 or similar). This removes between 75% and 80% of all dirt from carpets. 

The carpet area is then presprayed with Craftex ‘Catalyst’. This prespray then needs to be agitated with a shampoo brush or similar. 

The Thermal Rotary Machine is then used, with a thin bonnet pad soaked in Craftex ‘Catalyst’. As the machine heats the bonnet pad it draws all remaining dirt out of the carpet and into the pad. The high temp of heat kills off germs that lurk in the fibres also helps to dry very quickly!! 

This pad process is then repeated using a clean pad soaked again in Craftex Catalyst until the area to be cleaned has been covered. 

When cleaned, the area will be dry within a maximum time of 15 minutes.